On Mon, 27 Mar 2000 08:37:33 PST, "dan voth" <dvoth46@hotmail.com> wrote: >FlyBaby > >Hi guys,ordered my flybaby plans about a year ago.Just got on the flybaby >site and you guys are having too much fun! Im going to build my work bench >this next week and then get after it! Any one have ideas on the best size >for the work bench? I was thinking about 18 ft. long by 3 ft wide. Talk to >me! thanks, Dan Mine was 16 x 3 feet and worked well. I had a separate bench for odd work so the 16X3 had only the fuselage on it. David E. Munday E-mail: munday@engr.uky.edu Dept. of Mechanical Engineering Web: http://www.engr.uky.edu/~munday 521 CRMS Building Voice: (606) 257-3263 University of Kentucky FAX: (606) 257-3304 Lexington, KY 40506-0108 Office: 202 D. V. Terrell Bldg.