For Cleveland 6.00 x 6 wheels, the bearing ID is 1 1/2". You need to make adaptors to fit the 1 1/2" bearings to the 1 1/4" FlyBaby axel. I think you are asking for trouble with 3/4" axel. At 04:06 PM 12/16/99 -0800, you wrote: >FlyBaby > >Hey Everybody, Just a BIG Thanks to Wayne Spani for >the engine mount plans for the 0-235, much too >generous. My vote for the fly-in would be somewhere in >the middle. Mine won't be ready so I'll have to rent >the 172 for a few days. Here's a question for you tech >types. Aircraft Spruce has wheels for homebuilts but >the largest axel size is 3/4", can I use a 3/4" axel >on the gear as long as the wall size is the same? And >if so whats the best way to do the fittings for the >flying wire. Thanks!!! > >--- "Jerry W. David" <jdavid@dpnet.net> wrote: >> FlyBaby >> >> Where and when are we going to have this year's >> first annual fly-in?