Just bend the edges down 45 degrees behind the spar and nail them with 3/4 inch long cemented nails along the spar cap, about every two inches. Don't use regular nails. nail the top first and use something to pull the aluminum tight against the leading edge while you nail the bottom. Packing tape or string with wooden blocks to tighten them or nylon straps with ratchet ends, pulling from the aft spar, work good. JB. -----Original Message----- From: stephen langford <smlangford@webtv.net> To: FlyBaby <FlyBaby@listbot.com> Cc: FlyBaby <FlyBaby@listbot.com> Date: December 07, 1999 09:25 PM Subject: Re: Fly Baby, Anyone building the tail feathers of the Baby? FlyBaby I have bent some .016 alunimun for the leading edges of the tail feathers. Should I Epoxy and nail these to the LE ribs and spars? Steve.